User Guide

Verify the main unit and accessories for any damage. If you notice any signs of malfunction, do not use the device and contact your dealer or after-sales service.

a. Skin Tone Check: Refer to the skin color chart in the manual to determine if the product suits your skin.

b. Shave & Clean: Use a shaver to remove hair from the treatment area. Ensure that your skin is dry, healthy, and free from any wounds or abnormalities.

c. Flash Window: Clean the flash window following the instructions in the user manual before using the device.

Attention: For first-time users or individuals who have recently tanned, it is recommended to set the intensity to level 1 for use. Please refer to the user manual for detailed instructions.

3.1 Steps for using Manual Mode

a. Connect the power supply and keep the device 20-30 cm away from your eyes. Wear protective goggles.

b. Press and hold the Power Button for 1.5 seconds to power on/off the device. The device will enter the default Manual Mode (Intense Indicator flashes, Manual Mode, and Ice Cooling indicators remain lit).

c. Intensity selection: Short press the Power Button to adjust the flash energy (5 levels are available).

d. Place the device vertically on the treatment area, ensuring full contact. Press the Flash Button to emit a flash for hair removal.

e. Press and hold the Power Button for 1.5 seconds to power off the device, or short press the Flash Button for other modes.

3.2 Steps for using Auto Mode

a. Connect the power supply and keep the device 20-30 cm away from your eyes. Wear protective goggles.

b. Press and hold the Power Button for 1.5 seconds to power on/off the device. Press the Flash Button once to enter Auto Mode (Intense Indicator flashes, Auto Mode, and Ice Cooling indicators remain lit).

c. Place the device head vertically on the treatment area, ensuring full contact for automatic flashes (the device stops flashing when losing contact).

d. Press and hold the Power Button for 1.5 seconds to power off the device, or short press the Flash Button for other modes.

Note: If there is no skin contact, the Intensity Indicator will flash. The device will automatically shut down after 5 minutes of inactivity or no skin contact.

3.3 Post-Hair Removal Precautions

a. It is recommended to avoid contact with water within 6 hours after hair removal. After 6 hours, moisturize the treated area with a hydrating lotion.

b. Avoid excessive sun exposure during product use and allow at least 1 week for sunburn recovery.

c. Avoid swimming within 24 hours after hair removal and protect the treated area from excessive sun exposure. If swimming is unavoidable, be sure to apply sunscreen.

d. Please refer to the user manual for detailed precautions and instructions. If you experience any discomfort, please consult a dermatologist promptly.

3.4 Treatment Intervals

a. Weeks 1-4: 3 times per week

b. Weeks 5-8: 2 times per week

c. Over 8 weeks: Use the device once every two weeks

3.5 Care Cap Usage Instructions

The bands and light emission areas of the three care caps have been specially designed to achieve better hair removal effects and reduce skin irritation. Here are the features and suggested areas of use for the three care caps: